Minimum tread depth in the UK: the law, the check and the penalty
Car tyres must have at least 1.6mm of tread across the central three-quarters of the tread, all the way round. Each illegal tyre can bring a fine of up to £2,500 and 3 penalty points.
The legal limit
The limit is set in law and repeated in the Highway Code:
| Vehicle | Legal minimum |
|---|---|
| Cars, light vans and light trailers | 1.6mm across the central three-quarters of the tread, around the whole circumference |
| Motorbikes, large vehicles and passenger carrying vehicles | 1mm across three-quarters of the tread, in a continuous band around the whole circumference |
The outer edges, the quarter of the tread outside the central band, are not measured against the limit, but the whole tyre must still show visible tread. A tyre can be legal in the middle and bald on one shoulder, which is usually a sign of wrong alignment or pressures.
The penalty
Using a vehicle with a defective tyre carries a fine of up to £2,500 and 3 penalty points, and the penalty applies to each tyre. Four worn tyres could mean 12 points, which is enough for a ban under the totting up rules. The same offence covers more than tread: a tyre is also illegal with a cut longer than 25mm or 10% of its width that reaches the cords, a lump or bulge, exposed cords, the wrong pressure for its use, or a tyre of a different type or structure from the other on the same axle.
An insurer may also treat illegal tyres as a reason to reduce a claim after an accident.
How to check it yourself
- Tread wear indicators. Small raised bars sit across the bottom of the main grooves. When the tread is level with them, the tyre is at 1.6mm.
- The 20p test. Put a 20p coin into the main groove. If the outer band of the coin is hidden, there is comfortably more than the legal minimum. If you can see the band, measure properly.
- A tread depth gauge. These cost a few pounds and give a reading in millimetres.
Check at three or four points around each tyre and across its width, including the inner edge, which is the one that wears out of sight. Turn the steering to full lock to see the front tyres properly.
Why 1.6mm is a floor, not a target
Tread exists to clear water from under the tyre. As it wears, the grooves hold less water and the tyre loses grip in the wet sooner, so stopping distances on a wet road grow well before the legal limit is reached. Tyre safety campaigners commonly suggest replacing tyres at around 3mm for that reason. It is a judgement rather than a rule, and how much you drive on wet motorways matters more than the number.
How long tyres last
There is no fixed mileage. Front tyres on a front-wheel-drive car carry the steering, braking and drive, and usually wear faster than the rears. Hard acceleration, fast cornering, under-inflation and an alignment that is out all shorten tyre life, and a tyre that is regularly run soft wears both shoulders.
Age matters as well as tread. Rubber hardens and cracks with time, especially on a car that stands outside or is used little. The date of manufacture is on the sidewall as a four digit code: 2321 means the 23rd week of 2021. Since February 2021, tyres aged 10 years or more have been banned on the front steered axles of lorries, buses and coaches, and on single rear wheels of minibuses. That rule does not apply to cars, but it is a fair indication of how the industry views old rubber.
What the MOT looks at
The tester checks the condition, security, size, type and tread depth of each road wheel tyre, but not the spare. On cars first used from 1 January 2012, the tyre pressure monitoring warning light is checked too. Tyre condition is one of the most recorded defects at the test, as our list of MOT failures shows.
Replacing them
What a tyre costs fitted depends mostly on its size and brand, so ask for the price of the exact tyre, fitted and balanced. Fitting, balancing, a new valve and disposal of the old tyre are usually included, but it is worth asking. Replacing in pairs across an axle keeps the grip even side to side, and many fitters recommend putting the newer pair on the rear, where a loss of grip is harder to control. If one edge has worn faster than the rest, have the alignment checked at the same time, or the new tyre will go the same way.
Common questions
Do part-worn tyres have to meet a higher limit?
When they are sold, yes. A part-worn tyre must have at least 2mm of tread across its full width and be marked as part-worn. Once fitted, the ordinary 1.6mm limit applies.
Does the spare tyre have to be legal?
It is not checked at the MOT, but as soon as it goes on the car it must meet the same rules as any other tyre. A space saver also has a speed limit printed on it.
Is the limit different for winter or all-season tyres?
No. The legal minimum is the same, though winter tyres lose much of their snow grip well above it.
Do motorbike tyres have a different limit?
Yes. The minimum is 1mm across three-quarters of the tread, with visible tread on the rest.